Show simple item record

dc.contributor.authorHonorine Angue-Mintsa
dc.contributor.authorRavinder Venugopal
dc.contributor.authorJean-Pierre Kenné
dc.contributor.authorChristian Belleau
dc.date.accessioned2017-05-09T00:42:57Z
dc.date.available2017-05-09T00:42:57Z
dc.date.copyrightNovember, 2011
dc.date.issued2011
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26565#064506_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145665
dc.description.abstractElectrohydraulic servo systems (EHSS) are used for several engineering applications, and in particular, for efficient handling of heavy loads. These systems are characterized by pronounced nonlinearities and are also subject to parameter variations during operation, friction effects, and variable loads. Several studies have addressed the nonlinear nature of EHSS; however, only a few control schemes explicitly address friction and load disturbance effects along with parameter variations. Fuzzy and/or sliding mode versions of feedback linearizing controllers have been used to compensate for the external loads disturbances in the control of EHSS. However, real-time implementations issues limit the use of these techniques. While adaptive control using a feedback-linearization based controller structure has been shown to be effective in the presence of parameter variations, load and friction effects are typically not considered. In this paper, we present a nonlinear adaptive feedback linearizing position controller for an EHSS, which is robust to parameter uncertainty while achieving load disturbances rejection/attenuation and friction compensation. The adaptation law is derived using a Lyapunov approach. Simulation results using the proposed controller are compared to those using a nonadaptive feedback linearizing controller as well as a proportional-integral-derivative (PID) controller, in the presence of torque load disturbance, friction, and uncertainty in the hydraulic parameters. These results show improved tracking performance with the proposed controller. To address implementation concerns, simulation results with noise effects and valve saturation are also presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAdaptive Position Control of an Electrohydraulic Servo System With Load Disturbance Rejection and Friction Compensation
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4004776
dc.journal.fristpage64506
dc.identifier.eissn1528-9028
dc.keywordsFriction
dc.keywordsControl equipment
dc.keywordsServomechanisms
dc.keywordsStress
dc.keywordsDynamics (Mechanics)
dc.keywordsDesign
dc.keywordsFeedback
dc.keywordsTorque
dc.keywordsSignals
dc.keywordsNoise (Sound)
dc.keywordsSimulation results
dc.keywordsErrors
dc.keywordsValves AND Position control
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record