Show simple item record

dc.contributor.authorM. Z. Norhirni
dc.contributor.authorM. Hamdi
dc.contributor.authorS. Nurmaya Musa
dc.contributor.authorL. H. Saw
dc.contributor.authorN. A. Mardi
dc.contributor.authorN. Hilman
dc.date.accessioned2017-05-09T00:42:57Z
dc.date.available2017-05-09T00:42:57Z
dc.date.copyrightNovember, 2011
dc.date.issued2011
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26565#064505_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/145664
dc.description.abstractIn an axial piston pump design, the swash plate plays an important role in controlling the displacement of the pump, especially in a closed loop system. In this paper, the axial piston pump is incorporated into the design of a hydraulic regenerative braking system for hybrid vehicles. The pump in this configuration should function in dual mode, as a pump and as a motor. For this to occur, the swash plate should swing in two opposite directions. The swash plate presented in this paper is designed for stability and ease of control. Analytical analysis of torque and forces were conducted using MATLAB software to verify the motion of the swash plate. Furthermore, finite element analysis was also carried out to evaluate the rigidity and stress in the system. The analytical evaluation has shown that as the swash plate angle increases, the required control force and torque increase almost linearly. However, the change of the plate angle was found to have no effect on the force exerted on the X-axis and the torque exerted on the Z-axis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLoad and Stress Analysis for the Swash Plate of an Axial Piston Pump/Motor
dc.typeJournal Paper
dc.journal.volume133
dc.journal.issue6
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4004578
dc.journal.fristpage64505
dc.identifier.eissn1528-9028
dc.keywordsEngines
dc.keywordsStress
dc.keywordsDesign
dc.keywordsPumps
dc.keywordsPistons
dc.keywordsForce
dc.keywordsPressure
dc.keywordsTorque AND Containment
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2011:;volume( 133 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record