• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Inverse Dynamics of a Redundantly Actuated Four-Bar Mechanism Using an Optimal Control Formulation

    Thumbnail
    View/Open
    JDSMAA-26565#061009_1.pdf (1.230Mb)
    Date
    2011
    Author
    Olavo Luppi Silva
    Luciano Luporini Menegaldo
    Metadata
    Show full item record
    Abstract
    This paper presents an approach to estimating joint torques in a four-bar closed-chain mechanism with prescribed kinematics and redundant actuation, i.e., with more actuators than degrees of freedom. This problem has several applications in industrial robots, machine tools, and biomechanics. The inverse dynamics problem is formulated as an optimal control problem (OCP). The dynamical equations are derived for an open-chain mechanism, what keeps the formulation simple and straightforward. Sets of constraints are explored to force the three-link open-chain to behave as a four-bar mechanism with a crank rotating at a constant velocity. The controls calculated from the OCP are assumed to be the input joint torques. The standard case with one torque actuator is solved and compared to cases with two and three actuators. The case of two actuators presented the smallest peak and mean torques, using one specific set of constraints. Such torques were smaller than the solution obtained using an alternative method existing in literature that solves the redundancy problem by means of the pseudo-inverse matrix. Comparison with inverse dynamics solutions using well-established methods for the one-actuator closed-loop four-bar were equal. Reconstructed kinematical trajectories from forward integration of the closed-loop mechanism with the OCP obtained torques were essentially similar. The results suggest that the adopted procedure is promising, giving solutions with lower torque requirements than the regularly actuated case and redundantly actuated computed with other approaches. The applicability of the method has been shown for the four-bar mechanism. Other classes of redundantly actuated, closed-loop mechanisms could be tested using a similar formulation. However, the numerical parameters of the OCP must be chosen carefully to achieve convergence.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/145644
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV