Show simple item record

dc.contributor.authorD. Rudland
dc.contributor.authorD.-J. Shim
dc.contributor.authorA. Csontos
dc.date.accessioned2017-05-09T00:40:39Z
dc.date.available2017-05-09T00:40:39Z
dc.date.copyrightFebruary, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28525#011406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144728
dc.description.abstractTypical ASME Section XI subcritical cracking analyses assume an idealized flaw shape driven by stress intensity factors developed for semi-elliptical shaped flaws. Recent advanced finite element analyses (AFEA) conducted by both the United States Nuclear Regulatory Commission (U.S.NRC) and the nuclear industry for long circumferential indications found in the pressurizer nozzle dissimilar metal welds at the Wolf Creek power plant suggest that the semi-elliptical flaw assumption may be overly conservative in some cases. The AFEA methodology that was developed allowed the progression of a planar flaw subjected to typical stress corrosion cracking (SCC)-type growth laws by calculating stress intensity factors at every nodal point along the crack front, and incrementally advancing the crack front in a more natural manner. Typically, crack growth analyses increment the semi-elliptical flaw by considering only the stress intensity factor at the deepest and surface locations along the crack front, while keeping the flaw shape semi-elliptical. In this paper, a brief background to the AFEA methodology and the analyses conducted in the Wolf Creek effort will be discussed. In addition, the predicted behavior of surface cracks under normal operating conditions (plus welding residual stress) using AFEA will be investigated and compared with the semi-elliptical assumption. Conclusions on the observation of when semi-elliptical flaw assumptions are appropriate will be made. These observations will add insight into the conservatism of using an idealized flaw shape assumption.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Corrosion Crack Shape Development Using AFEA
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000349
dc.journal.fristpage11406
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsShapes
dc.keywordsLeakage
dc.keywordsStress corrosion cracking AND Welding
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record