Show simple item record

dc.contributor.authorFu-Zhen Xuan
dc.contributor.authorJun Si
dc.contributor.authorShan-Tung Tu
dc.date.accessioned2017-05-09T00:40:39Z
dc.date.available2017-05-09T00:40:39Z
dc.date.copyrightFebruary, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28525#011405_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144727
dc.description.abstractMultiple interacting cracks are generally treated as an enveloping single crack if the prescribed criterion is satisfied in the current fitness-for-service codes. To examine the applicability of the existing criteria under creep regime, in this report, creep crack interaction effects of plates containing collinear cracks or parallel cracks are first analyzed under the framework of reference stress method and finite element computations. An equivalent crack growth rate criterion is then proposed to develop a congruous multiple crack treatment rule for different growth mechanisms. The current combination rule for multiple cracks is examined and modified in terms of the proposed new criterion. The results reveal that the creep crack interaction factor is a combined function of creep exponent n of materials, limit load ratio of cracked structures, and interaction of stress intensity factor. More pronounced interaction is observed for both interacting cracks in the same plane and that in different planes. Although a higher intensity of creep crack interaction is observed, a greater value of γcreep is permissible compared with that of linear-elastic crack interaction denoted by SIF. Accordingly, a modified combination rule for collinear cracks of S/a=3.0 is proposed to exclude the nonconservativeness, while the current alignment rule for offset parallel cracks of H/a=2.0 is still practicable in terms of the proposed criterion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRules for the Assessment of Interacting Cracks Under Creep Conditions
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000358
dc.journal.fristpage11405
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsFracture (Materials) AND Stress
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record