Show simple item record

dc.contributor.authorA. H. Yaghi
dc.contributor.authorG. Hilson
dc.contributor.authorS. Simandjuntak
dc.contributor.authorP. E. J. Flewitt
dc.contributor.authorM. J. Pavier
dc.contributor.authorD. J. Smith
dc.contributor.authorT. H. Hyde
dc.contributor.authorA. A. Becker
dc.contributor.authorW. Sun
dc.date.accessioned2017-05-09T00:40:38Z
dc.date.available2017-05-09T00:40:38Z
dc.date.copyrightFebruary, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28525#011206_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144719
dc.description.abstractResidual macrostresses in a multipass circumferentially butt-welded P91 ferritic steel pipe have been determined numerically and experimentally. The welded joint in a pipe with an outer diameter of 290 mm and a wall thickness of 55 mm is typical of power generation plant components. An axisymmetric thermomechanical finite element model has been used to predict the resulting residual hoop and axial stresses in the welded pipe. The effects of the austenite to martensite phase transformation have been incorporated into the simulation. Residual stresses have been measured using the X-ray diffraction technique along the outer surface of the pipe and using the deep-hole drilling technique through the wall thickness at the center of the weld. Good correlation has been demonstrated between the residual hoop and the axial stresses obtained numerically and experimentally. The paper demonstrates the importance of using a mixed experimental and numerical approach to determine accurately the residual macrostress distribution in welded components.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Comparison Between Measured and Modeled Residual Stresses in a Circumferentially Butt-Welded P91 Steel Pipe
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000347
dc.journal.fristpage11206
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record