Show simple item record

dc.contributor.authorM. D. Pandey
dc.contributor.authorA. K. Sahoo
dc.date.accessioned2017-05-09T00:40:37Z
dc.date.available2017-05-09T00:40:37Z
dc.date.copyrightApril, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28527#021403_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144708
dc.description.abstractThe leak-before-break (LBB) assessment of pressure tubes is intended to demonstrate that in the event of through-wall cracking of the tube, there will be sufficient time followed by the leak detection, for a controlled shutdown of the reactor prior to the rupture of the pressure tube. CSA Standard N285.8 (2005, “Technical Requirements for In-Service Evaluation of Zirconium Alloy Pressure Tubes in CANDU Reactors,” Canadian Standards Association) has specified deterministic and probabilistic methods for LBB assessment. Although the deterministic method is simple, the associated degree of conservatism is not quantified and it does not provide a risk-informed basis for the fitness for service assessment. On the other hand, full probabilistic methods based on simulations require excessive amount of information and computation time, making them impractical for routine LBB assessment work. This paper presents an innovative, semiprobabilistic method that bridges the gap between a simple deterministic analysis and complex simulations. In the proposed method, a deterministic criterion of CSA Standard N285.8 is calibrated to specified target probabilities of pressure tube rupture based on the concept of partial factors. This paper also highlights the conservatism associated with the current CSA Standard. The main advantage of the proposed approach is that it retains the simplicity of the deterministic method, yet it provides a practical, risk-informed basis for LBB assessment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Risk-Informed Approach to Leak-Before-Break Assessment of Pressure Tubes in CANDU Reactors
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3148087
dc.journal.fristpage21403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record