Show simple item record

dc.contributor.authorKazuaki Inaba
dc.contributor.authorJoseph E. Shepherd
dc.date.accessioned2017-05-09T00:40:36Z
dc.date.available2017-05-09T00:40:36Z
dc.date.copyrightApril, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28527#021302_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144704
dc.description.abstractWe experimentally studied the propagation of coupled fluid stress waves and tube flexural waves generated through projectile impact along the axis of a water-filled tube. We tested mild steel tubes, 38–40 mm inner diameter and wall thicknesses of 0.8 mm, 6.4 mm, and 12.7 mm. A steel impactor was accelerated using an air cannon and struck a polycarbonate buffer placed on top of the water surface within the tube. Elastic flexural waves were observed for impact speeds of 5–10 m/s and plastic waves appeared for impact speeds approaching 20 m/s for a 0.8 mm thickness tube. We observed primary wave speeds of 1100 m/s in a 0.8 mm thickness tube, increasing to the water sound speed with 6.4 mm and 12.7 mm thickness tubes. Comparison of our measurements in the 0.8 mm thickness tube with Skalak’s water hammer theory indicates reasonable agreement between the predicted and measured peak strains as a function of the impact buffer speed (1956, “An Extension to the Theory of Water Hammer,” Trans. ASME, 78, pp. 105–116). For thick-walled tubes, the correlation between the experimentally determined peak pressures and strains reveals the importance of corrections for the through-wall stress distribution.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlexural Waves in Fluid-Filled Tubes Subject to Axial Impact
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000510
dc.journal.fristpage21302
dc.identifier.eissn1528-8978
dc.keywordsFluids
dc.keywordsWaves
dc.keywordsSpeed
dc.keywordsPressure
dc.keywordsProjectiles
dc.keywordsPolishing equipment AND Water
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record