Show simple item record

dc.contributor.authorR. Adibi-Asl
dc.contributor.authorW. Reinhardt
dc.date.accessioned2017-05-09T00:40:35Z
dc.date.available2017-05-09T00:40:35Z
dc.date.copyrightApril, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28527#021201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144694
dc.description.abstractA simple and systematic procedure is proposed for shakedown analysis using a combination of linear and nonlinear finite element analysis (FEA). The method can identify the boundary between the shakedown and ratcheting domains directly and does not require a cyclic analysis (noncyclic). The proposed method performs an elastic-plastic FEA to determine the reduction in load carrying capacity due to the cyclic secondary loads. An elastic modulus adjustment procedure is then used to generate statically admissible stress distributions and kinematically admissible strain distributions under the applied primary loads. By modifying the local elastic moduli it is possible to obtain inelastic-like stress redistribution. The method is demonstrated with a “two-bar structure” model based on analytical routine. The analysis is then applied to some typical shakedown problems including the “classical Bree problem,” the “bimaterial cylinder,” and the “plate with a hole subjected to radial temperature gradient.”
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRatchet Boundary Determination Using a Noncyclic Method
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4000506
dc.journal.fristpage21201
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record