Show simple item record

dc.contributor.authorMing-De Xue
dc.contributor.authorQing-Hai Du
dc.contributor.authorKeh-Chih Hwang
dc.contributor.authorZhi-Hai Xiang
dc.date.accessioned2017-05-09T00:40:34Z
dc.date.available2017-05-09T00:40:34Z
dc.date.copyrightJune, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28533#031207_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144686
dc.description.abstractA universal design method for pressurized cylindrical shells with attached nozzles subjected to external forces (moments) and internal pressure are presented, based on theoretical stress analysis. The applicable ranges of the presented design methods are extended to ρ0=d/D≤0.9 and λ=d/(DT)1/2≤12. As a first step of design, the required reinforcement thicknesses, both of the main shell and nozzle due to internal pressure, can be determined by the presented theoretical solutions. When the junction is subjected to external nozzle loads, the next step is to determine the absolute values of dimensionless longitudinal and circumferential, normal and shear, membrane and bending stresses in the shell at the junction subjected to internal pressure, and six external nozzle load components by reading out from a number of sets of curves calculated by the present theoretical method. Then the stress components at eight examination points are calculated and superimposed for the combined loads. Finally, the membrane and primary plus secondary stress intensities can be calculated, respectively, to meet the design criteria.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Analytical Method for Cylindrical Shells With Nozzles Due to Internal Pressure and External Loads—Part II: Design Method
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001200
dc.journal.fristpage31207
dc.identifier.eissn1528-8978
dc.keywordsDesign methodology
dc.keywordsNozzles
dc.keywordsPipes
dc.keywordsPressure
dc.keywordsStress
dc.keywordsDesign
dc.keywordsStress analysis (Engineering) AND Membranes
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record