Show simple item record

dc.contributor.authorMasaaki Tabuchi
dc.contributor.authorYasushi Hasegawa
dc.contributor.authorKen-ichi I. Kobayashi
dc.contributor.authorToshimitsu Yokobori
dc.contributor.authorTakeo Yokobori
dc.contributor.authorMasataka Yatomi
dc.contributor.authorAkio Fuji
dc.date.accessioned2017-05-09T00:40:32Z
dc.date.available2017-05-09T00:40:32Z
dc.date.copyrightAugust, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28534#041404_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144674
dc.description.abstractHigh Cr ferritic heat resisting steels have been widely used for boiler components in ultrasupercritical thermal power plants operated at about 600°C. In the welded joint of these steels, type-IV crack initates in the fine-grained heat affected zone during long-term use at high temperatures and their creep strength decreases. In this paper, creep properties and creep crack growth (CCG) properties of P92 welds are presented. The CCG tests are carried out using cross-welded compact tension C(T) specimens at several temperatures. The crack front was located within the fine-grained HAZ region to simulate type-IV cracking. Finite element analysis was conducted to simulate multiaxiality in welded joints and to compare experimental results. The constitutive behavior for these materials is described by a power-law creep model. C∗ and Q∗ parameters are used to evaluate CCG rate of P92 welds for comparison. C∗ parameters can characterize approximately 20% of the total life of CCG in P92 welds, and Q∗ parameters can characterize approximately 80% of the total life. Q∗ parameter is one of the useful parameters to predict CCG life in P92 welds.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Creep Crack Growth Rate of P92 Welds Using Fracture Mechanics Parameters
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001522
dc.journal.fristpage41404
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsWelded joints
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis AND Base metals
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record