Show simple item record

dc.contributor.authorYoichi Kayamori
dc.contributor.authorTetsuya Tagawa
dc.contributor.authorTakehiro Inoue
dc.date.accessioned2017-05-09T00:40:32Z
dc.date.available2017-05-09T00:40:32Z
dc.date.copyrightAugust, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28534#041401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144671
dc.description.abstractExperimental and analytical investigations into crack tip opening displacement (CTOD) were conducted to demonstrate the relationship between BS7448-CTOD and ASTM E1290-CTOD. The CTOD test results showed that ASTM-CTOD was occasionally much lower than BS-CTOD both in single edge notch bend specimens and in compact tension (C(T)) specimens for low-strength structural steels, and this tended to be more remarkable in C(T) specimens. In addition, the analytical results of simplified elastic-plastic fracture parameter calculation using the Electric Power Research Institute scheme demonstrated that the ratio of ASTM-CTOD to BS-CTOD was not constant but varied according to CTOD changes. Material factors such as the yield stress, the strain hardening exponent, specimen size and configurations influenced the CTOD ratio, and low strain hardening exponents in the Ramberg–Osgood relation and C(T) specimen configuration significantly decreased the CTOD ratio. An equation that transforms BS-CTOD into ASTM-CTOD is proposed in this study. This equation gives a good estimate of ASTM-CTOD from BS-CTOD.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransformation of BS7448-CTOD to ASTM E1290-CTOD
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001196
dc.journal.fristpage41401
dc.identifier.eissn1528-8978
dc.keywordsASTM International
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record