Show simple item record

dc.contributor.authorTakashi Ogata
dc.contributor.authorTakayuki Sakai
dc.contributor.authorMasatsugu Yaguchi
dc.date.accessioned2017-05-09T00:40:28Z
dc.date.available2017-05-09T00:40:28Z
dc.date.copyrightOctober, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28535#051204_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144640
dc.description.abstractThe clarification of creep damage mechanism and the establishment of remaining life prediction methods of longitudinal welded piping of P91 steel are important subjects to maintain a reliable operation of boilers in thermal power plants. Internal pressure creep tests were conducted on P91 steel longitudinal welded tubes to characterize the evolution of creep damage with time and to evaluate a life prediction method. Interrupted creep tests were performed for damage observation in addition to rupture tests. Three dimensional finite element creep analyses of the longitudinal welded tube specimens were conducted to identify the stress and creep strain distributions within the specimen during creep. Failure occurred at a heat affected zone (HAZ) without a significant macroscopic deformation. It was found that the initiation of creep voids had concentrated at the midthickness region in the HAZ rather than in the surface. The creep analysis results indicated that the triaxial tensile stress yielded at the midthickness region in the HAZ due to difference of creep deformation property among the base metal, the HAZ, and the weld metal. It was suggested that the triaxial stress state caused acceleration of the creep damage evolution in the HAZ, resulting in internal failure of the tube specimens. A rupture time prediction method of the welded tube is proposed based on the maximum principal stress and the triaxial stress factor in the HAZ. The void growth behavior in the HAZ was well predicted by the previously proposed void growth simulation method by introducing a void initiation function to the method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDamage Evolution and Life Prediction of a P91 Longitudinal Welded Tube Under Internal Pressure Creep
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue5
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001688
dc.journal.fristpage51204
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsCreep
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsRupture AND Pipes
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record