Show simple item record

dc.contributor.authorN. S. Cheruvu
dc.contributor.authorM. R. Govindaraju
dc.contributor.authorD. W. Gandy
dc.contributor.authorR. Wei
dc.date.accessioned2017-05-09T00:40:27Z
dc.date.available2017-05-09T00:40:27Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28536#061403_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144629
dc.description.abstractCyclic oxidation behavior and microstructural degradation of nanocrystalline Ni–20Cr–xAl (where x=4 wt %, 7 wt %, and 10 wt %) coatings have been investigated. The coatings were deposited on Haynes 230 samples using a magnetron sputtering technique. Cyclic oxidation tests were conducted on the uncoated and coated samples at peak temperatures of 750°C and 1010°C for up to 2070 thermal cycles between the peak and room temperatures. The results showed that a dense Al2O3 scale was formed on the external surface of all coatings after exposure at both temperatures. All three coatings showed no evidence of internal oxidation after exposure at 750°C. Among the three coatings, only the coating containing 4 wt % Al showed evidence of internal oxidation along the columnar grain boundaries after exposure at 1010°C. The Al2O3 scale exhibited good spallation resistance during cyclic oxidation tests at both temperatures. As the Al content in the coating increased from 4 wt % to 7 wt % or 10 wt %, thermal exposure led to precipitation of coarse Al-rich particles at the coating/substrate interface. In addition, thermal exposure at both temperatures led to rapid depletion of Al in the coating and grain coarsening of the coatings. The improvement in oxide scale spallation resistance and accelerated depletion of aluminum are attributed to the ultrafine grain structure of the coating and oxide scale.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Nanocrystalline Coatings for Coal-Fired Ultrasupercritical Boiler Tubes
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001548
dc.journal.fristpage61403
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsCycles
dc.keywordsoxidation
dc.keywordsBoiler tubes
dc.keywordsTesting
dc.keywordsGrain size AND Coal
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record