Show simple item record

dc.contributor.authorE. Troiano
dc.contributor.authorA. P. Parker
dc.contributor.authorC. Mossey
dc.contributor.authorJ. H. Underwood
dc.date.accessioned2017-05-09T00:40:27Z
dc.date.available2017-05-09T00:40:27Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28536#061402_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144628
dc.description.abstractThe autofrettage process of a thick walled pressure vessel involves applying tensile plastic strain at the bore of the vessel, which reverses during unloading and results in favorable compressive residual stresses at the bore and prolongs the fatigue life of the component. In thick walled pressure vessels this process can be accomplished with either a hydraulic or mechanical overloading process. The Bauschinger effect, which is observed in many of the materials used in thick walled pressure vessels, is a phenomenon, which results in lower compressive residual stresses than those predicted with classic ideal isotropic hardening. The phenomenon is a strong function of the amount of prior tensile plastic strain. A novel idea, which involves a multiple autofrettage processes, has been proposed by the present authors. This process requires a low temperature post-autofrettage thermal treatment, which effectively returns the material to its original yield conditions with minimal effect on its residual stress state. Details of this low temperature thermal treatment are proprietary. A subsequent second autofrettage process generates a significantly lower amount of plastic strain during the tensile reloading and results in higher compressive residual stresses. This paper reports the details of the exploratory tests involving tensile and compressive loading of a test coupon, followed by a low temperature post-plastic straining thermal treatment, and subsequent reloading in tension and compression. Finally results of a full scale safe maximum pressure (SMP) test of pressure vessels are presented; these tests indicate a significant increase (11%) in SMP.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePost-Autofrettage Thermal Treatment and Its Effect on Reyielding of High Strength Pressure Vessel Steels
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001209
dc.journal.fristpage61402
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsAutofrettage
dc.keywordsStress
dc.keywordsPressure
dc.keywordsLow temperature AND Vessels
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record