Show simple item record

dc.contributor.authorNor Eddine Laghzale
dc.contributor.authorAbdel-Hakim Bouzid
dc.date.accessioned2017-05-09T00:40:26Z
dc.date.available2017-05-09T00:40:26Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28536#061210_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144625
dc.description.abstractSteam generators are the subject of major concern in nuclear power plant safety. Within these generators, the tightness barrier, which separates the primary and secondary circuits, is ensured by the existence of a residual contact pressure at the tube-to-tubesheet joint interface. Any leakage is unacceptable, and its consequences are very heavy in terms of the human and environmental safety as well as maintenance cost. Some studies have been conducted to understand the main reasons for such failure. However, no analytical model able to predict the attenuation of the residual contact pressure under the effect of material creep relaxation behavior. The development of a simple analytical model able to predict the change in the residual contact pressure as a function of time is laid out in this paper. The results from the analytical model are checked and compared with those of finite elements. A simulation conducted on a high temperature tube-to-tubesheet joint has shown that relaxation of the contact stress due to creep can be significant and should be considered in the design.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Creep on the Residual Stresses in Tube-to-Tubesheet Joints
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001218
dc.journal.fristpage61210
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record