Show simple item record

dc.contributor.authorB. H. Wu
dc.contributor.authorG. E. O. Widera
dc.contributor.authorZ. F. Sang
dc.date.accessioned2017-05-09T00:40:26Z
dc.date.available2017-05-09T00:40:26Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28536#061203_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/144617
dc.description.abstractThe objective of this paper is to determine the plastic limit moment for cylindrical vessels with a nozzle under in-plane moment loading. Three full scale test models with different d/D ratios were fabricated for the experiment. A three-dimensional nonlinear finite element analysis was also performed. The plastic limit moment of the cylindrical vessel-nozzle connections was determined approximately by the twice-elastic-slope criterion. The results indicate that the plastic limit moments obtained by the experiment and finite element analysis are in good agreement. On the basis of the above results, a parametric analysis of the plastic limit moment for cylindrical vessels under in-plane moment on the nozzle was carried out, and an empirical formula is proposed. The results can serve as a supplement to the available data of plastic limit load for cylindrical vessel-nozzle connection structures under external load.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePlastic Analysis for Cylindrical Vessels Under In-Plane Moment on the Nozzle
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue6
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.4001741
dc.journal.fristpage61203
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsNozzles
dc.keywordsVessels
dc.keywordsDeformation AND Equations
dc.treeJournal of Pressure Vessel Technology:;2010:;volume( 132 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record