Show simple item record

dc.contributor.authorV. Kathare
dc.contributor.authorF. A. Kulacki
dc.contributor.authorJane H. Davidson
dc.date.accessioned2017-05-09T00:39:10Z
dc.date.available2017-05-09T00:39:10Z
dc.date.copyrightJanuary, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27878#014503_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143964
dc.description.abstractHeat transfer measurements for natural convection in superposed metal foam and water layers are reported. Two systems heated at the lower boundary are considered: a water-filled cavity with a foam layer on the heated surface and a water-filled cavity with foam layers on the upper and lower surfaces. The present experiments use open cell copper foams with a nominal porosity of 92%, and the relative thicknesses of the water and foam layers are varied. Steady state Nusselt numbers show that the presence of foam on the boundaries enhances overall heat transfer coefficients over that for the water-only layer. Enhancement of overall Nusselt numbers varies from 12% to 60% depending on Rayleigh number. Sublayer configurations with foam on both heat transfer surfaces are more effective for enhancement than a configuration with foam only on the heated surface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBuoyant Convection in Superposed Metal Foam and Water Layers
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3194767
dc.journal.fristpage14503
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsMetal foams
dc.keywordsWater
dc.keywordsCopper AND Convection
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record