Show simple item record

dc.contributor.authorZunlong Jin
dc.contributor.authorQiwu Dong
dc.contributor.authorMinshan Liu
dc.date.accessioned2017-05-09T00:39:09Z
dc.date.available2017-05-09T00:39:09Z
dc.date.copyrightJanuary, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27878#011802_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143951
dc.description.abstractSelection of fouling factors is somewhat arbitrary in heat exchanger networks (HENs) synthesis. Fouling factors were reconsidered in this article for heat exchanger networks design. An objective function based on exergoeconomic analysis was introduced to assess optimal less conservative fouling factors. The objective took account of exergy consumption expense and heat exchanger capital cost at the same time. The exergy consumption of heat transfer in HENs was calculated using subsection integral on balanced composite curves. The proposed method was applied to an industrial case. Numerical results indicated that the optimal less conservative fouling factors were 80% of the original values and the heat transfer area of the system saved 350 m2 compared with root design. So it is necessary to reconsider the values of fouling factors for HENs design and that exergoeconomic analysis is useful in determining the optimal less conservative fouling factors.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExergy Study of Fouling Factors in Heat Exchanger Networks
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.3194766
dc.journal.fristpage11802
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsExergy
dc.keywordsHeat exchangers AND Networks
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record