• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Heat Transfer
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Optimal Distribution of Heat Sources in Convergent Channels Cooled by Laminar Forced Convection

    Thumbnail
    View/Open
    JHTRAO-27878#011701_1.pdf (549.9Kb)
    Date
    2010
    Author
    E. Jassim
    Y. S. Muzychka
    Metadata
    Show full item record
    Abstract
    The constructal theory is applied to the flow in a convergent channel. The primary goals of this work are to analyze the heat source distribution and generalize the formula concerning such configurations, to study the spacing between consecutive elements, and to verify the analysis by comparing the proposed configuration with numerical simulations. The results show that nonuniform distributions enhance the performance of the system by allowing the heat source element to work near its maximum condition. Furthermore, the optimal distribution occurs when the heat sources are placed closer to each other near the leading edge of the channel. While the literature shows that the spacing between any consecutive element increases as the sources move downstream from the leading edge, the present results proved that such conclusions are restricted, depending on the ratio of outlet to inlet freestream velocity. Accordingly, the spacing has a maximum value when the exit freestream velocity is more than twice that of the inlet. For design issues, the study also addresses the minimum heat required to achieve optimal system performance. The results show that the amount of heat needed by the system to work close to its optimal performance varies exponentially with the convergent angle and increases with the increase in the heating element’s width. The comparison of the present distribution of the heat source elements with a regular one (fixed spacing) is performed numerically to demonstrate the efficiency of the proposed configuration. The results show that the present model forces the system to work more efficiently than the uniform distribution.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/143948
    Collections
    • Journal of Heat Transfer

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV