Show simple item record

dc.contributor.authorSantosh Krishnamurthy
dc.contributor.authorYoav Peles
dc.date.accessioned2017-05-09T00:39:01Z
dc.date.available2017-05-09T00:39:01Z
dc.date.copyrightApril, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27885#041007_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143887
dc.description.abstractFlow boiling of 1-methoxyheptafluoropropane (HFE 7000) in 222 μm hydraulic diameter channels containing a single row of 24 inline 100 μm pin fins was studied for mass fluxes from 350 kg/m2 s to 827 kg/m2 s and wall heat fluxes from 10 W/cm2 to 110 W/cm2. Flow visualization revealed the existence of isolated bubbles, bubbles interacting, multiple flow, and annular flow. The observed flow patterns were mapped as a function of the boiling number and the normalized axial distance. The local heat transfer coefficient during subcooled boiling was measured and found to be considerably higher than the corresponding single-phase flow. Furthermore, a thermal performance evaluation comparison with a plain microchannel revealed that the presence of pin fins considerably enhanced the heat transfer coefficient.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4000878
dc.journal.fristpage41007
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsBubbles
dc.keywordsBoiling
dc.keywordsFins
dc.keywordsMicrochannels
dc.keywordsHeat transfer coefficients
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsHeat flux
dc.keywordsFlux (Metallurgy) AND Subcooling
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record