Show simple item record

dc.contributor.authorO. Abouali
dc.contributor.authorN. Baghernezhad
dc.date.accessioned2017-05-09T00:39:01Z
dc.date.available2017-05-09T00:39:01Z
dc.date.copyrightApril, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27885#041005_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143885
dc.description.abstractThis paper presents a numerical investigation for two types of grooves (rectangular and arc shapes) fabricated in the microchannel surfaces, which leads to enhancement in single-phase cooling. The pressure drop and heat transfer characteristics of the single-phase microchannel heat sink were investigated numerically for laminar flow. For this purpose, the conjugate heat transfer problem involving simultaneous determination of temperature fields in both solid and liquid regions was solved numerically. The numerical model was validated with comparison to experimental data, in which good agreement was seen. A simple microchannel with available experimental data was selected, and it was shown that using grooved surfaces on this microchannel has a noticeable effect and heat removal rate can be increased using this technique. The results depict that the arc grooves have a higher heat removal flux compared with rectangular grooves but the latter have a higher coefficient of performance for the case in which grooves are made in the floor and both side walls. Also, it was shown that a grooved microchannel with higher wall thickness and lower mass flow rate of cooling water has a higher heat removal flux and coefficient of performance compared with a simple microchannel with minimum wall thickness. Effect of various sizes and distances of the floor grooves was determined, and the cases for maximum heat removal rate and coefficient of performance for both rectangular and arc grooves were obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Investigation of Heat Transfer Enhancement in a Microchannel With Grooved Surfaces
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue4
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4000862
dc.journal.fristpage41005
dc.identifier.eissn1528-8943
dc.keywordsMicrochannels AND Heat transfer
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record