| dc.contributor.author | R. Wälchli | |
| dc.contributor.author | T. Brunschwiler | |
| dc.contributor.author | D. Poulikakos | |
| dc.contributor.author | B. Michel | |
| dc.date.accessioned | 2017-05-09T00:38:58Z | |
| dc.date.available | 2017-05-09T00:38:58Z | |
| dc.date.copyright | May, 2010 | |
| dc.date.issued | 2010 | |
| dc.identifier.issn | 0022-1481 | |
| dc.identifier.other | JHTRAO-27887#051401_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/143858 | |
| dc.description.abstract | A self-contained, small-volume liquid cooling system for thin form-factor electronic equipment (e.g., blade server modules) is demonstrated experimentally in this paper. A reciprocating water flow loop absorbs heat using mesh-type microchannel cold plates and spreads it periodically to a larger area. From there, the thermal energy is interchanged via large area, low pressure drop cold plates with a secondary heat transfer loop (air or liquid). Four phase-shifted piston pumps create either a linearly or radially oscillating fluid flow in the frequency range of 0.5–3 Hz. The tidal displacement of the pumps covers 42–120% of the fluid volume, and, therefore, an average flow rate range of 100–800 ml/min is tested. Three different absorber mesh designs are tested. Thermal and fluidic characteristics are presented in a time-resolved and a time-averaged manner. For a fluid pump power of 1 W, a waste heat flux of 180 W/cm2(ΔT=67 K) could be dissipated from a 3.5 cm2 chip. A linear oscillation flow pattern is advantageous over a radial one because of the more efficient heat removal from the chip and lower hydraulic losses. The optimum microchannel mesh density is determined as a combination of low pump losses and high heat transfer rates. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Self-Contained, Oscillating Flow Liquid Cooling System for Thin Form Factor High Performance Electronics | |
| dc.type | Journal Paper | |
| dc.journal.volume | 132 | |
| dc.journal.issue | 5 | |
| dc.journal.title | Journal of Heat Transfer | |
| dc.identifier.doi | 10.1115/1.4000456 | |
| dc.journal.fristpage | 51401 | |
| dc.identifier.eissn | 1528-8943 | |
| dc.tree | Journal of Heat Transfer:;2010:;volume( 132 ):;issue: 005 | |
| dc.contenttype | Fulltext | |