Show simple item record

dc.contributor.authorStefano Cordiner
dc.contributor.authorAlessandro Mariani
dc.contributor.authorVincenzo Mulone
dc.date.accessioned2017-05-09T00:38:57Z
dc.date.available2017-05-09T00:38:57Z
dc.date.copyrightJune, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27889#062801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143851
dc.description.abstractMicrotubular solid oxide fuel cells (MT-SOFCs) are interesting for portable and auxiliary power units energy production systems, due to their extremely fast startup time. However, a single cell provides power in the range of 1 W, thus the number of microtubes to reach a kW scale is relevant and packaging design issues arise also. In this paper a specifically developed design procedure is presented to face with system issues and bringing into account fluid-dynamic and thermal influence on system performance. The procedure also simplifies the stack manifold design by means of a modular scale-up procedure starting from a basic optimized configuration. To this aim, a computational fluid dynamics (CFD) model has been integrated with specific models for fuel cell simulation and then validated with tailored experimental data by varying operating conditions in terms of fuel utilization and electric load. A comprehensive three–dimensional (3D) thermal-fluid-dynamic model has then been applied to the analysis of both micro-assembly (i.e., 15 tube assembly) and midi-assembly (up to 45 tubes), showing an important role of local phenomena as current homogeneity and reactant local concentration that have a strong influence on power density and temperature distribution. Microreactor power density in the range of 0.3 kW/l have been demonstrated and a specific manifold design has been realized paving the way toward a modular realization of a 1 kW MT-SOFC.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCFD-Based Design of Microtubular Solid Oxide Fuel Cells
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue6
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4000709
dc.journal.fristpage62801
dc.identifier.eissn1528-8943
dc.keywordsDensity
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsComputational fluid dynamics
dc.keywordsDesign
dc.keywordsSolid oxide fuel cells
dc.keywordsGeometry
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsFuels
dc.keywordsTemperature gradients
dc.keywordsEquations
dc.keywordsAir flow AND Fluids
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record