Show simple item record

dc.contributor.authorHamid Reza Seyf
dc.contributor.authorMohammad Layeghi
dc.date.accessioned2017-05-09T00:38:53Z
dc.date.available2017-05-09T00:38:53Z
dc.date.copyrightJuly, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27891#071401_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143816
dc.description.abstractA numerical analysis of forced convective heat transfer from an elliptical pin fin heat sink with and without metal foam inserts is conducted using three-dimensional conjugate heat transfer model. The pin fin heat sink model consists of six elliptical pin rows with 3 mm major diameter, 2 mm minor diameter, and 20 mm height. The Darcy–Brinkman–Forchheimer and classical Navier–Stokes equations, together with corresponding energy equations are used in the numerical analysis of flow field and heat transfer in the heat sink with and without metal foam inserts, respectively. A finite volume code with point implicit Gauss–Seidel solver in conjunction with algebraic multigrid method is used to solve the governing equations. The code is validated by comparing the numerical results with available experimental results for a pin fin heat sink without porous metal foam insert. Different metallic foams with various porosities and permeabilities are used in the numerical analysis. The effects of air flow Reynolds number and metal foam porosity and permeability on the overall Nusselt number, pressure drop, and the efficiency of heat sink are investigated. The results indicate that structural properties of metal foam insert can significantly influence on both flow and heat transfer in a pin fin heat sink. The Nusselt number is shown to increase more than 400% in some cases with a decrease in porosity and an increase in Reynolds number. However, the pressure drop increases with decreasing permeability and increasing Reynolds number.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Analysis of Convective Heat Transfer From an Elliptic Pin Fin Heat Sink With and Without Metal Foam Insert
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue7
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4000951
dc.journal.fristpage71401
dc.identifier.eissn1528-8943
dc.keywordsReynolds number
dc.keywordsConvection
dc.keywordsNumerical analysis
dc.keywordsEquations
dc.keywordsFins
dc.keywordsHeat sinks
dc.keywordsMetal foams
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsPressure drop
dc.keywordsPermeability AND Porosity
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record