Show simple item record

dc.contributor.authorC. S. Yang
dc.contributor.authorD. Z. Jeng
dc.contributor.authorC. W. Liu
dc.contributor.authorC. G. Liu
dc.contributor.authorC. Gau
dc.date.accessioned2017-05-09T00:38:51Z
dc.date.available2017-05-09T00:38:51Z
dc.date.copyrightAugust, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27893#081403_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143800
dc.description.abstractSecondary flow structure and its enhancement on the heat transfer in a horizontal divergent channel have been studied. The bottom wall is horizontal and is heated uniformly while the opposite top wall is insulated and inclined with respect to the horizontal plane so as to create a divergent angle of 3 deg. At the entrance of the channel, the aspect ratios for the width to the height and the channel length to the height are 6.67 and 15, respectively. The Reynolds number ranges from 100 to 2000 and the buoyancy parameter Gr/Re2 from 0 to 405. Both flow visualization and temperature fluctuation measurements at different locations are made to indicate the flow structure and oscillation of the secondary flow. The adverse pressure gradient in the divergent channel causes a thicker heated layer in the bottom and earlier initiation of secondary flow. Interaction between neighboring vortices and plumes becomes more severe and highly unstable. This precludes the formation of steady two-dimensional longitudinal vortex rolls in the downstream and leads to an earlier and larger enhancement of the heat transfer than the case of the parallel-plate channel. The effects of the buoyancy parameter and the divergence of the channel on the secondary flow structure and the Nusselt number are presented and discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFluid Flow and Heat Transfer in a Horizontal Channel With Divergent Top Wall and Heated From Below
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001606
dc.journal.fristpage81403
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsPlumes (Fluid dynamics)
dc.keywordsVortices
dc.keywordsTemperature
dc.keywordsBuoyancy AND Flow visualization
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record