Show simple item record

dc.contributor.authorAvanish Mishra
dc.contributor.authorAmer Hameed
dc.contributor.authorBryan Lawton
dc.date.accessioned2017-05-09T00:38:49Z
dc.date.available2017-05-09T00:38:49Z
dc.date.copyrightSeptember, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27895#091901_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143781
dc.description.abstractLiquid cooling methods are often used for thermal management of a large caliber gun barrel. In this work, transient thermal analyses of midwall-cooled and externally cooled gun barrels were performed. At first, a novel simulation scheme was developed for the computation of the gun barrel temperature history (temperature variation over time), and its experimental validation was performed. In the computational scheme an internal ballistics code, GUNTEMP8.EXE , was developed to simulate the total heat transfer per cycle for the given ammunition parameters. Subsequently, a finite element (FE) model of the barrel was developed in ANSYS 11.0. Heat transfer to the barrel was approximated by an exponentially decaying heat flux. The FE model was solved to compute for barrel temperature history. Simulations were performed for a burst of 9 cycles, and the results were found to agree with the experimental measurements. Subsequently, the simulation scheme was extended to analyze a burst of 40 cycles at 10 shots per minute (spm). Three cases were investigated as follows: (1) a naturally cooled gun barrel, (2) a gun barrel with midwall cooling channels, and (3) an externally cooled gun barrel. Natural cooling was found insufficient to prevent cook-off, whereas midwall and external cooling methods were found to eliminate any possibility of it. In the context of a self-propelled howitzer, a midwall-cooled gun barrel connected to an engine cooling system was also analyzed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient Thermal Analyses of Midwall Cooling and External Cooling Methods for a Gun Barrel
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001607
dc.journal.fristpage91901
dc.identifier.eissn1528-8943
dc.keywordsTemperature
dc.keywordsCooling
dc.keywordsCycles
dc.keywordsGun barrels
dc.keywordsSimulation
dc.keywordsHeat transfer
dc.keywordsThermal analysis AND Finite element model
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record