Show simple item record

dc.contributor.authorQiu-Wang Wang
dc.contributor.authorGui-Dong Chen
dc.contributor.authorJing Xu
dc.contributor.authorYan-Peng Ji
dc.date.accessioned2017-05-09T00:38:47Z
dc.date.available2017-05-09T00:38:47Z
dc.date.copyrightOctober, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27897#101801_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143755
dc.description.abstractShell-and-tube heat exchangers (STHXs) have been widely used in many industrial processes. In the present paper, flow and heat transfer characteristics of the shell-and-tube heat exchanger with continuous helical baffles (CH-STHX) and segmental baffles (SG-STHX) were experimentally studied. In the experiments, these STHXs shared the same tube bundle, shell geometrical structures, different baffle arrangement, and number of heat exchange tubes. Experimental results suggested that the CH-STHX can increase the heat transfer rate by 7–12% than the SG-STHX for the same mass flow rate although its effective heat transfer area had 4% decrease. The heat transfer coefficient and pressure drop of the CH-STHX also had 43–53% and 64–72% increase than those of the SG-STHX, respectively. Based on second-law thermodynamic comparisons in which the quality of energy are evaluated by the entropy generation number and exergy losses, the CH-STHX decreased the entropy generation number and exergy losses by 30% and 68% on average than the SG-STHX for the same Reynolds number. The analysis from nondimensional correlations for Nusselt number and friction factor also revealed that if the maximal velocity ratio R>2.4, the heat transfer coefficient of CH-STHX was higher than that of SG-STHX, and the corresponding friction factor ratio kept at constant fo,CH/fo,SG=0.28.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSecond-Law Thermodynamic Comparison and Maximal Velocity Ratio Design of Shell-and-Tube Heat Exchangers With Continuous Helical Baffles
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001755
dc.journal.fristpage101801
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsReynolds number
dc.keywordsEntropy
dc.keywordsHeat exchangers
dc.keywordsPressure drop
dc.keywordsShells
dc.keywordsHeat transfer coefficients
dc.keywordsFlow (Dynamics)
dc.keywordsFriction
dc.keywordsExergy AND Design
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record