Show simple item record

dc.contributor.authorK. Ghosh
dc.contributor.authorR. J. Goldstein
dc.date.accessioned2017-05-09T00:38:46Z
dc.date.available2017-05-09T00:38:46Z
dc.date.copyrightOctober, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27897#101702_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143754
dc.description.abstractMass transfer measurements on a flat plate downstream of a belt moving in the same direction of the freestream study the effect of the upstream shear on the heat (mass) transfer for four belt-freestream velocity ratios. With an increase in this ratio, the “virtual origin” of the turbulent boundary layer “moves” downstream toward the trailing edge of the belt. This is verified from the variation of the Stanton number versus the Reynolds number plots. As the “inner” region of the boundary layer is removed for a belt speed of uw=10 m/s (freestream velocity uin≈15.4 m/s), a corresponding local minimum in the variation of the Stanton number is observed. Downstream of this minimum, the characteristics of the turbulent boundary layer are restored and the data fall back on the empirical variation of Stanton with Reynolds number.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Upstream Shear on Flow and Heat (Mass) Transfer Over a Flat Plate—Part II: Mass Transfer Measurements
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001609
dc.journal.fristpage101702
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsMass transfer
dc.keywordsMeasurement
dc.keywordsShear (Mechanics)
dc.keywordsFlat plates
dc.keywordsBelts AND Boundary layer turbulence
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record