Show simple item record

dc.contributor.authorK. Ghosh
dc.contributor.authorR. J. Goldstein
dc.date.accessioned2017-05-09T00:38:46Z
dc.date.available2017-05-09T00:38:46Z
dc.date.copyrightOctober, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27897#101701_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143753
dc.description.abstractA parametric study investigates the effects of wall shear on a two-dimensional turbulent boundary layer. A belt translating along the direction of the flow imparts the shear. Velocity measurements are performed at 12 streamwise locations with four surface-to-freestream velocity ratios (0, 0.38, 0.52, and 0.65) and a momentum-based Reynolds number between 770 and 1776. The velocity data indicate that the location of the “virtual origin” of the turbulent boundary layer “moves” downstream toward the trailing edge of the belt with increasing surface velocity. The highest belt velocity ratio (0.65) results in the removal of the “inner” region of the boundary layer. Measurements of the streamwise turbulent kinetic energy show an inner scaling at locations upstream and downstream of the belt, and the formation of a new self-similar structure on the moving surface itself. Good agreement is observed for the variation in the shape factor (H) and the skin friction coefficient (cf) with the previous studies. The distribution of the energy spectrum downstream of the belt indicates peak values concentrated around 1 kHz for the stationary belt case in the near wall region (30<y+<50). However, with increasing belt velocity, this central peak plateaus over a wide frequency range (0.9–4 kHz).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Upstream Shear on Flow and Heat (Mass) Transfer Over a Flat Plate—Part I: Velocity Measurements
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue10
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001608
dc.journal.fristpage101701
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsBoundary layers
dc.keywordsVelocity measurement
dc.keywordsBelts
dc.keywordsShear (Mechanics)
dc.keywordsTurbulence
dc.keywordsMeasurement AND Boundary layer turbulence
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record