Show simple item record

dc.contributor.authorWen-Tao Ji
dc.contributor.authorDing-Cai Zhang
dc.contributor.authorNan Feng
dc.contributor.authorMitsuharu Numata
dc.contributor.authorWen-Quan Tao
dc.contributor.authorGuannan Xi
dc.contributor.authorJian-Fei Guo
dc.date.accessioned2017-05-09T00:38:44Z
dc.date.available2017-05-09T00:38:44Z
dc.date.copyrightNovember, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27900#111502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143730
dc.description.abstractPool boiling heat transfer coefficients of R134a with different lubricant mass fractions for one smooth tube and five enhanced tubes were tested at a saturation temperature of 6°C. The lubricant used was polyvinyl ether. The lubrication mass fractions were 0.25%, 0.5%, 1.0%, 2.0%, 3.0%, 5.0%, 7.0%, and 10.0%, respectively. Within the tested heat flux range, from 9000 W/m2 to 90,000 W/m2, the lubricant generally has a different influence on pool boiling heat transfer of these six tubes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNucleate Pool Boiling Heat Transfer of R134a and R134a-PVE Lubricant Mixtures on Smooth and Five Enhanced Tubes
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4001931
dc.journal.fristpage111502
dc.identifier.eissn1528-8943
dc.keywordsHeat transfer
dc.keywordsLubricants
dc.keywordsBoiling
dc.keywordsHeat flux
dc.keywordsHeat transfer coefficients
dc.keywordsRefrigerants
dc.keywordsPool boiling AND Temperature
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record