Show simple item record

dc.contributor.authorA. Alper Ozalp
dc.contributor.authorIbrahim Dincer
dc.date.accessioned2017-05-09T00:38:42Z
dc.date.available2017-05-09T00:38:42Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27902#121703_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143714
dc.description.abstractThis paper presents a comprehensive computational work on the hydrodynamic, thermal, and mass transfer characteristics of a circular cylinder, subjected to confined flow at the cylinder Reynolds number of Red=40. As the two-dimensional, steady and incompressible momentum and energy equations are solved using ANSYS-CFX (version 11.0), the moisture distributions are computed by a new alternating direction implicit method based software. The significant results, highlighting the influence of blockage (β=0.200–0.800) on the flow and heat transfer mechanism and clarifying the combined roles of β and moisture diffusivity (D=1×10−8–1×10−5 m2/s) on the mass transfer behavior, are obtained for practical applications. It is shown that the blockage augments the friction coefficients (Cf) and Nusselt numbers (Nu) on the complete cylinder surface, where the average Nu are evaluated as Nuave=3.66, 4.05, 4.97, and 6.51 for β=0.200, 0.333, 0.571, and 0.800. Moreover, the blockage shifts separation (θs) and maximum Cf locations (θCf−max) downstream to the positions of θs=54.10, 50.20, 41.98, and 37.30 deg and θCf−max=51.5, 53.4, 74.9, and 85.4 deg. The highest blockage of β=0.800 encourages the downstream backward velocity values, which as a consequence disturbs the boundary layer and weakens the fluid-solid contact. The center and average moisture contents differ significantly at the beginning of drying process, but in the last 5% of the drying period they vary only by 1.6%. Additionally, higher blockage augments mass transfer coefficients (hm) on the overall cylinder surface; however, the growing rate of back face mass transfer coefficients (hm−bf) is dominant to that of the front face values (hm−ff), with the interpreting ratios of h¯m−bf/h¯m=0.50 and 0.57 and h¯m−ff/h¯m=1.50 and 1.43 for β=0.200 and 0.800.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLaminar Boundary Layer Development Around a Circular Cylinder: Fluid Flow and Heat-Mass Transfer Characteristics
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.4002288
dc.journal.fristpage121703
dc.identifier.eissn1528-8943
dc.keywordsFluid dynamics
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsMass transfer
dc.keywordsHeat transfer
dc.keywordsSeparation (Technology)
dc.keywordsDrying
dc.keywordsBoundary layers
dc.keywordsCircular cylinders
dc.keywordsCylinders
dc.keywordsMechanisms
dc.keywordsComputation
dc.keywordsFluids
dc.keywordsEquations
dc.keywordsMomentum
dc.keywordsTemperature AND Friction
dc.treeJournal of Heat Transfer:;2010:;volume( 132 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record