Show simple item record

dc.contributor.authorY. Liu
dc.contributor.authorK. Yasumoto
dc.contributor.authorY. Funahashi
dc.contributor.authorY. Fijishiro
dc.contributor.authorA. Hirano
dc.contributor.authorY. Takeda
dc.contributor.authorS. Hashimoto
dc.contributor.authorK. Takei
dc.contributor.authorM. Mori
dc.date.accessioned2017-05-09T00:38:22Z
dc.date.available2017-05-09T00:38:22Z
dc.date.copyrightDecember, 2010
dc.date.issued2010
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-28945#061003_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143559
dc.description.abstractIn this work, a microtubular cell consisting of a thin Ce0.9Gd0.1O1.95 (GDC) electrolyte (thickness: below 10 μm) on a support NiO/GDC anode (1.8 mm outer diameter, 200 μm wall thickness) with a La0.6Sr0.4Co0.2Fe0.8O3−δ/GDC functional cathode has been developed for intermediate/low temperature operation. The functional cathode was prepared by in situ infiltrating the electrochemically catalytic nano-Ag particles into the as-established 20 μm thick cathode. The as-proposed Ag-impregnation route ensures a very homogeneous particle dispersion and a good adhesion of Ag to the ceramic matrices. The cells were successfully operated to produce the maximum power densities of 0.41 W cm−2 (1.27 A cm−2, 0.32 V), 0.83 W cm−2 (2.23 A cm−2, 0.37 V), and 1.05 W cm−2 (2.39 A cm−2, 0.44 V) at 450°C, 500°C, and 550°C, respectively.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Ceria Based SOFCs With a High Performance La0.6Sr0.4Co0.2Fe0.8O3−δ–Ce0.9Gd0.1O1.95–Ag Composite Cathode
dc.typeJournal Paper
dc.journal.volume7
dc.journal.issue6
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.3176220
dc.journal.fristpage61003
dc.identifier.eissn2381-6910
dc.keywordsAnodes
dc.keywordsComposite materials
dc.keywordsCeramics
dc.keywordsSolid oxide fuel cells
dc.keywordsElectrolytes
dc.keywordsParticulate matter
dc.keywordsCermets
dc.keywordsThickness
dc.keywordsMeasurement
dc.keywordsLow temperature
dc.keywordsManufacturing AND Wall thickness
dc.treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record