Show simple item record

dc.contributor.authorPatrick Luckow
dc.contributor.authorPeter Rodgers
dc.contributor.authorJuan Cevallos
dc.contributor.authorAvram Bar-Cohen
dc.date.accessioned2017-05-09T00:37:19Z
dc.date.available2017-05-09T00:37:19Z
dc.date.copyrightJune, 2010
dc.date.issued2010
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26569#021001_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/143000
dc.description.abstractThe compression process necessary for the liquefaction of natural gas on offshore platforms generates large amounts of heat, usually dissipated via sea water cooled plate heat exchangers. To date, the corrosive nature of sea water has mandated the use of metals, such as titanium, as heat exchanger materials, which are costly in terms of life cycle energy expenditure. This study investigates the potential of a commercially available, thermally conductive polymer material, filled with carbon fibers to enhance thermal conductivity by an order of magnitude or more. The thermofluid characteristics of a prototype polymer seawater-methane heat exchanger that could be used in the liquefaction of natural gas on offshore platforms are evaluated based on the total coefficient of performance (COPT), which incorporates the energy required to manufacture a heat exchanger along with the pumping power expended over the lifetime of the heat exchanger, and compared with those of conventional heat exchangers made of metallic materials. The heat exchanger fabricated from a low energy, low thermal conductivity polymer is found to perform as well as, or better than, exchangers fabricated from conventional materials, over its full lifecycle. The analysis suggests that a COPT nearly double that of aluminum, and more than ten times that of titanium, could be achieved. Of the total lifetime energy use, 70% occurs in manufacturing for a thermally enhanced polymer heat exchanger compared with 97% and 85% for titanium and aluminum heat exchangers, respectively. The study demonstrates the potential of thermally enhanced polymer heat exchangers over conventional ones in terms of thermal performance and life cycle energy expenditure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnergy Efficient Polymers for Gas-Liquid Heat Exchangers
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4001568
dc.journal.fristpage21001
dc.identifier.eissn1528-8994
dc.keywordsHeat exchangers
dc.keywordsPolymers
dc.keywordsHeat transfer
dc.keywordsManufacturing
dc.keywordsThermal conductivity AND Seawater
dc.treeJournal of Energy Resources Technology:;2010:;volume( 132 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record