Show simple item record

dc.contributor.authorKhalid Alzebdeh
dc.contributor.authorTasneem Pervez
dc.contributor.authorSayyad Z. Qamar
dc.date.accessioned2017-05-09T00:37:18Z
dc.date.available2017-05-09T00:37:18Z
dc.date.copyrightSeptember, 2010
dc.date.issued2010
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26570#031002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/142991
dc.description.abstractControl of water flow in open hole wells is an urgent necessity to minimize water production and maximize oil output. Elastomers provide tight seals as they deform against formation during the expansion process of a solid expandable tubular. A better prediction of behavior of elastomers in compression will achieve an effective sealing mechanism. Due to the inherent nonlinearity of tubular expansion and elastomer compression against open hole formation, a closed form solution is extremely difficult to obtain. Finite element modeling provides a viable alternative, as an approximate simulation tool, to determine the seal pressure without significant compromise on the complexity of the problem. The finite element analysis software is employed to model the tubular expansion resulting in compression of elastomer seal to effectively isolate unwanted water producing zones. The formation is modeled as a rigid body or an elastic or elastic-plastic material. Two different boundary conditions, fixed-free and fixed-fixed, are employed depending on prevailing practices of oil operators in such applications. The effect of seal length and thickness, compression ratio and shear resistance at seal-formation interface are determined on the contact pressure between seal and formation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Simulation of Compression of Elastomeric Seals in Open Hole Liners
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.4002244
dc.journal.fristpage31002
dc.identifier.eissn1528-8994
dc.keywordsPressure
dc.keywordsFriction
dc.keywordsElastomers
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsFinite element analysis
dc.keywordsBoundary-value problems
dc.keywordsCompression
dc.keywordsThickness
dc.keywordsSealing (Process)
dc.keywordsModeling
dc.keywordsWater
dc.keywordsMechanisms AND Wells
dc.treeJournal of Energy Resources Technology:;2010:;volume( 132 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record