• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Kinematic Analysis of a Swash-Plate Controlled Variable Displacement Axial-Piston Pump With a Conical Barrel Assembly

    Thumbnail
    View/Open
    JDSMAA-26510#011002_1.pdf (529.5Kb)
    Date
    2010
    Author
    Zhiru Shi
    Gordon Parker
    Jonathan Granstrom
    Metadata
    Show full item record
    Abstract
    Variable displacement, swash-plate controlled, axial-piston pumps are widely used in applications that require high pressure and variable flow rates. The pump consists of a rotating barrel assembly that houses several pistons in a circular array. A swash-plate is used to control the displacement of the pistons to adjust the output flow of hydraulic fluid. As the barrel rotates, the pistons slide along the angled swash-plate and draw oil from the supply and then discharge oil into the high pressure circuit. This results in an almost constant output flow rate. This paper analyzes the kinematics of a pump based on its geometry dependent characteristics. The analysis assumes an idealized case in which there is no oil leakage and the fluid is considered to be incompressible. It is revealed through the analysis that the piston displacement and the pump output flow are slightly increased by using a conical barrel. Instantaneous and mean flow rate equations are used to describe the output flow characteristics and flow ripple effect. The output flow rate ripple profile is found to be a function of both swash-plate angle and the conical barrel angle. A term defined as the flow rate uniformity coefficient is used to better quantify the flow ripple phenomenon. A frequency analysis is performed on the output flow rate and an additional order is found to be present when using a conical barrel pump versus one with a cylindrical barrel when the pumps have an odd number of pistons. Conical barrel piston pumps are found to have a slight increase in piston displacement, velocity, and acceleration relative to the rotating barrel frame of reference over a pump with a cylindrical barrel. This translates into an increase in the output flow rate for a conical piston pump under the same operating conditions. The conical barrel is also found to have a reduction in the rotational inertia allowing for faster angular acceleration. The presence of an extra order from a frequency analysis for a conical pump with an odd number of pistons has the potential to cause unwanted noise or vibration to the structure or components attached to the pump.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/142904
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV