Show simple item record

dc.contributor.authorHanz Richter
dc.date.accessioned2017-05-09T00:37:06Z
dc.date.available2017-05-09T00:37:06Z
dc.date.copyrightMay, 2010
dc.date.issued2010
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26520#031002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/142866
dc.description.abstractA constrained sliding mode control methodology developed by the author is applied to the motion control of an open container filled with liquid. The objective is to control the position of the container to meet the performance and robustness requirements, and to specify a safe operating set, i.e., the set of initial conditions from which the system can be operated without exceeding a prescribed liquid level and additional constraints. A conventional sliding mode regulator is designed first to address nominal performance in the sliding mode. Then, a robustly invariant cylinder formed as the Cartesian product of an ellipsoid, and a closed interval is constructed using linear matrix inequalities. A set of constraint qualification conditions are evaluated to ensure that the intersection of the cylinder and the state constraints is robustly positively invariant, constituting the required operating set. Simulations and experimental results corresponding to a high-speed transfer validate the methodology.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMotion Control of a Container With Slosh: Constrained Sliding Mode Approach
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.4001329
dc.journal.fristpage31002
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2010:;volume( 132 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record