• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Dynamic Systems, Measurement, and Control
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Enabling Automation of Friction Stir Welding: The Modulation of Weld Seam Input Energy by Traverse Speed Force Control

    Thumbnail
    View/Open
    JDSMAA-26525#041002_1.pdf (1.790Mb)
    Date
    2010
    Author
    William R. Longhurst
    Alvin M. Strauss
    George E. Cook
    Metadata
    Show full item record
    Abstract
    Friction stir welding (FSW) joins materials by plunging a rotating tool into the work piece. The tool consists of a shoulder and a pin that plastically deforms the parent materials and then forges them together under the applied pressure. To create the pressure needed for forging, a rather large axial force must be maintained on the tool. Maintaining this axial force is challenging for robots due to their limited load capacity and compliant nature. To address this problem, force control has been used, and historically, the force has been controlled by adjusting the plunge depth of the tool into the work piece. This paper develops the use of tool traverse speed as the controlling variable instead of plunge depth. To perform this investigation, a FSW force controller was designed and implemented on a retrofitted Milwaukee Model K milling machine. The closed loop proportional, integral plus derivative (PID) control architecture was tuned using the Ziegler–Nichols method. Results show that the control of axial force via traverse speed is feasible and predictable. The resulting system is more robust and stable when compared with a force controller that uses plunge depth as the controlling variable. A standard deviation of 41.5 N was obtained. This variation is much less when compared with a standard deviation of 129.4 N obtained when using plunge depth. Using various combinations of PID control, the system’s response to step inputs was analyzed. From this analysis, a feed forward transfer function was modeled that describes the machinery and welding environment. From these results, a technique is presented regarding weld seam input energy modulation as a by product of force control via traverse speed. A relative indication of thermal energy in the welding environment is obtained with the feedback of axial force. It is hypothesized that, while under force control, the controller modulates weld seam input energy according to the control signal. The result is constant thermomechanical conditions in the welding environment. It is concluded that the key enablers for force control are the unidirectional behavior and load dynamics of the traverse motor. Larger bandwidths and more stable weld conditions emerge when using traverse speed instead of plunge depth to control the force. Force control of FSW via traverse speed has importance in creating efficient automatic manufacturing operations. The intelligence of the controller naturally selects the most efficient traverse speed.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/142848
    Collections
    • Journal of Dynamic Systems, Measurement, and Control

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV