Show simple item record

dc.contributor.authorHélder F. Pereira
dc.contributor.authorAbílio M. De Jesus
dc.contributor.authorAntónio A. Fernandes
dc.contributor.authorAlfredo S. Ribeiro
dc.date.accessioned2017-05-09T00:35:15Z
dc.date.available2017-05-09T00:35:15Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28503#011405_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141882
dc.description.abstractThis paper presents an investigation about the plasticity correction factor, Ke, proposed in the Part 3-Clause 18 of the EN13445 standard, for correction of the elastic stress ranges exceeding twice the yield stress, resulting from mechanical loading. The plasticity correction factors are analyzed using a calculation strategy based on a comparison between results from linear elastic and elastoplastic analyses. Several materials, elastoplastic models, and geometries are considered in the study. The performed analyses revealed, for an important number of the situations, an underestimation of the Ke factor when calculated according to the standard procedures. A greater emphasis should be dedicated in the standard to the elastoplastic analysis, since the fatigue resistance data presented in the standard are strain-life type data, overcoming the need for the plasticity correction factor. The elastoplastic analysis should be the preferred approach for evaluation of the strains/stresses for fatigue analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Preliminary Assessment of the Ke Factor Proposed in the EN13445 Standard for Fatigue Analysis of Unwelded Material
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3027455
dc.journal.fristpage11405
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record