Show simple item record

dc.contributor.authorC. M. Falcone
dc.contributor.authorM. B. Ruggles-Wrenn
dc.date.accessioned2017-05-09T00:35:15Z
dc.date.available2017-05-09T00:35:15Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28503#011403_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141880
dc.description.abstractThe inelastic deformation behavior of PMR-15 neat resin, a high-temperature thermoset polymer, was investigated at 288°C. The effect of loading rate on monotonic stress-strain behavior as well as the effect of prior stress rate on creep behavior were explored. Positive nonlinear rate sensitivity was observed in monotonic loading. Creep response was found to be significantly influenced by prior stress rate. The effect of loading history on creep was studied in stepwise creep tests, where specimens were subjected to a constant stress rate loading followed by unloading to zero stress with intermittent creep periods on both loading and unloading paths. The strain-time response was strongly influenced by prior deformation history. Negative creep was observed on the unloading path. In addition, the behavior of the material was characterized in terms of a nonlinear viscoelastic model by means of creep and recovery tests at 288°C. The model was employed to predict the response of the material under monotonic loading/unloading and multistep load histories.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRate Dependence and Short-Term Creep Behavior of a Thermoset Polymer at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3027475
dc.journal.fristpage11403
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record