Show simple item record

dc.contributor.authorA. E. Segall
dc.contributor.authorD. Engels
dc.contributor.authorA. Hirsh
dc.date.accessioned2017-05-09T00:35:13Z
dc.date.available2017-05-09T00:35:13Z
dc.date.copyrightFebruary, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28503#011201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141864
dc.description.abstractThermoelastic states as they pertain to thermal-shock are difficult to determine since the underlying boundary conditions must be known or measured. For direct problems where the boundary conditions such as temperature or flux, are known a priori, the procedure is mathematically tractable with many analytical solutions available. Although this is more practical from a measurement standpoint, the inverse problem where the boundary conditions must be determined from remotely determined temperature and/or flux data are ill-posed and therefore inherently sensitive to errors in the data. Moreover, the limited number of analytical solutions to the inverse problem rely on assumptions that usually restrict them to timeframes before the thermal wave reaches the natural boundaries of the structure. Fortunately, a generalized solution based on strain-histories can be used instead to determine the underlying thermal excitation via a least-squares determination of coefficients for generalized equations for strain. Once the inverse problem is solved and the unknown boundary condition on the opposing surface is determined, the resulting polynomial can then be used with the generalized direct solution to determine the thermal- and stress-states as a function of time and position. For the two geometries explored, namely a thick-walled cylinder under an internal transient with external convection and a slab with one adiabatic surface, excellent agreement was seen with various test cases. The derived solutions appear to be well suited for many thermal scenarios provided that the analysis is restricted to the time interval used to determine the polynomial and the thermophysical properties that do not vary with temperature. While polynomials were employed for the current analysis, transcendental functions and/or combinations with polynomials can also be used.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTransient Surface Strains and the Deconvolution of Thermoelastic States and Boundary Conditions
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3006350
dc.journal.fristpage11201
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record