Show simple item record

dc.contributor.authorS. J. Lewis
dc.contributor.authorC. E. Truman
dc.contributor.authorD. J. Smith
dc.date.accessioned2017-05-09T00:35:11Z
dc.date.available2017-05-09T00:35:11Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28506#021408_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141851
dc.description.abstractThe influence of various assumptions on the modeling of cleavage fracture in the presence of residual stresses was investigated. Analyses were undertaken for modified single edge notched bend specimens, manufactured from A533B ferritic steel. The influence of residual stress fields, introduced by a method of in-plane compression, was investigated through the use of a modified J-integral, designed to retain path independence in the presence of initial stress and strain fields and nonproportional loading. Application of modified J values to predict fracture using probabilistic methods, and their use in a well-known structural integrity assessment code, showed that assumptions about levels of out-of-plane constraint, material hardening behavior, and the method of crack introduction have a significant influence on the conservatism of the resulting failure predictions. It was found that more realistic modeling of crack introduction had a major effect on the accuracy of failure predictions, with the effects of material hardening being of secondary importance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Comparison of Two- and Three-Dimensional Fracture Assessments in the Presence of Residual Stresses
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3066938
dc.journal.fristpage21408
dc.identifier.eissn1528-8978
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsHardening
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsModeling
dc.keywordsStress
dc.keywordsFailure
dc.keywordsThree-dimensional models
dc.keywordsSteel
dc.keywordsPlane strain AND Compression
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record