Show simple item record

dc.contributor.authorMasaaki Tabuchi
dc.contributor.authorYukio Takahashi
dc.contributor.authorHiromichi Hongo
dc.contributor.authorYongkui Li
dc.contributor.authorTakashi Watanabe
dc.date.accessioned2017-05-09T00:35:11Z
dc.date.available2017-05-09T00:35:11Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28506#021406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141849
dc.description.abstractThe creep strength of welded joints in high Cr steels decreases due to the formation of Type IV creep damage in heat-affected zones (HAZs) during long-term use at high temperatures. This paper aims to elucidate the processes and mechanisms of Type IV creep damage using Mod.9Cr–1Mo (ASME Grade 91) steel weldments. Long-term creep tests for base metal, simulated fine-grained HAZ, and welded joints were conducted at 550°C, 600°C, and 650°C. Furthermore, creep tests of thick welded joint specimens were interrupted at 0.1, 0.2, 0.5, 0.7, 0.8, and 0.9 of rupture life and damage distributions were measured quantitatively. It was found that creep voids were initiated at an early stage of life inside the specimen thickness and coalesced to form cracks at a later stage of life. Creep damage was observed mostly at 25% below the surface of the plate. Experimental creep damage distributions were compared with computed versions using finite element method and damage mechanics analysis. Both multi-axial stress state and strain concentration in fine-grained HAZ appear to influence the formation and distribution of creep voids.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Microstructures and Creep Damages in the HAZ of P91 Steel Weldment
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3028021
dc.journal.fristpage21406
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsSteel
dc.keywordsWelded joints
dc.keywordsBase metals
dc.keywordsRupture
dc.keywordsStress AND Fracture (Materials)
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record