Show simple item record

dc.contributor.authorKwang S. Kim
dc.contributor.authorRong Jiao
dc.contributor.authorXu Chen
dc.contributor.authorMasao Sakane
dc.date.accessioned2017-05-09T00:35:11Z
dc.date.available2017-05-09T00:35:11Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28506#021405_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141848
dc.description.abstractMultiaxial ratcheting is often simulated by use of nonlinear kinematic hardening models, while in reality materials show cyclic hardening/softening and additional hardening under nonproportional loading. The effect of isotropic hardening on ratcheting needs to be addressed in simulation. In this study, ratcheting tests are conducted on stainless steel 304 under uniaxial, torsional, and combined axial-torsional loading. The ratcheting strain is predicted based on the constitutive theory that incorporates a modified Ohno–Wang kinematic hardening rule and Tanaka’s isotropic hardening model. The results show that the main features of the stress-strain response can be simulated with the constitutive model. Ratcheting strain under axial mean stress depends highly on the loading path and load level, and the degree of cyclic changes in shear stress under torsional strain control is not as influential. The torsional ratcheting strain under mean shear stress with (or without) fully reversed axial strain cycling is found close to the axial ratcheting strain under equivalent mean stress with (or without) torsional strain cycling. In all, the experimental and predicted ratcheting strains for nonproportional paths are found in decent correlation. However, overprediction still prevails for some loading paths, and ratcheting rates deviate considerably from experimental values.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRatcheting of Stainless Steel 304 Under Multiaxial Nonproportional Loading
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3027498
dc.journal.fristpage21405
dc.identifier.eissn1528-8978
dc.keywordsHardening
dc.keywordsShear (Mechanics)
dc.keywordsStress
dc.keywordsCycles AND Stainless steel
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record