Show simple item record

dc.contributor.authorKunio Hasegawa
dc.contributor.authorKoichi Saito
dc.contributor.authorFuminori Iwamatsu
dc.contributor.authorKatsumasa Miyazaki
dc.date.accessioned2017-05-09T00:35:09Z
dc.date.available2017-05-09T00:35:09Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28506#021209_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141835
dc.description.abstractFully plastic collapse stress for a single circumferential flaw on a pipe is evaluated by the limit load criteria in accordance with the JSME Code S NA-1-2004 and the ASME Code Section XI. However, multiple flaws such as stress corrosion cracking are frequently detected in the same circumferential cross section in a pipe. If the distance between adjacent flaws is short, the two flaws are combined as a single flaw in compliance with combination rules. If the two flaws separated by a large distance, it is not required to combine two flaws. However, there is no evaluation method for two separated flaws in a pipe in the JSME and ASME Codes. Plastic collapse stresses for pipes with two symmetrical circumferential flaws based on net-stress approach had been proposed by one of the authors. Bending tests were performed on Type 304 stainless steel pipes with two symmetrical circumferential flaws. Consequently, it was shown that the proposed method can predict well the plastic collapse stresses for pipes with two flaws. In addition, it is also shown that this method is appropriate to use in fitness-for-service procedures, and higher plastic collapse stresses are expected, compared with current prediction methods for pipes with two flaws.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePrediction of Fully Plastic Collapse Stresses for Pipes With Two Circumferential Flaws
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3066967
dc.journal.fristpage21209
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsPipes
dc.keywordsCollapse AND Symmetry (Physics)
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record