Show simple item record

dc.contributor.authorKatsumasa Miyazaki
dc.contributor.authorMasanori Numata
dc.contributor.authorKoichi Saito
dc.contributor.authorMasahito Mochizuki
dc.date.accessioned2017-05-09T00:35:09Z
dc.date.available2017-05-09T00:35:09Z
dc.date.copyrightApril, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28506#021205_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141829
dc.description.abstractThe fixed conditions of butt welds between straight pipe and the valves or pump in an actual piping system are different from those of straight pipes. However, the effect of the fixed condition on the residual stress and the stress intensity factor for the evaluation of the structural integrity of cracked piping is not clear. In this study, finite element analyses were conducted by considering the differences in the distance from the center of weld to the fixed end L, to clarify the effect of the fixed condition on the residual stress and the stress intensity factor. For 600A piping, the residual stress distribution was not affected by L. Furthermore, the stress intensity factors of circumferential cracks under the residual stress field can be estimated by using an existing simplified solution for piping.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of the Distance From the Center of a Weld to the Fixed End on the Residual Stress and Stress Intensity Factor of a Piping Weld
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3007428
dc.journal.fristpage21205
dc.identifier.eissn1528-8978
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record