Show simple item record

dc.contributor.authorZhao-Xi Wang
dc.contributor.authorFei Xue
dc.contributor.authorHui-Ji Shi
dc.contributor.authorJian Lu
dc.date.accessioned2017-05-09T00:35:08Z
dc.date.available2017-05-09T00:35:08Z
dc.date.copyrightJune, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28510#034503_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141823
dc.description.abstractThe fracture behavior of pipes with penetrating cracks was experimentally investigated with the results of the load-deflection curves and crack length. J-R curves were obtained from the testing results for different temperatures. With the decrement in temperature, the critical J integral decreases and the tearing modulus increases. An updated continuum damage model was proposed, in which the fracture energy density as a function of the stress triaxiality, temperature and strain rate in the transition region was taken as the critical damage factor. The uni-axial tension experiments at different temperatures were carried out to obtain the basic material properties and the critical fracture energy density, to verify the validity of the damage model. Based on detailed finite element analyses with the proposed updated continuum damage model, the loading level of pipes with penetrating cracks was estimated and compared with the experimental results, meanwhile the fracture processes of the pipeline structure in the ductile-brittle-transition-temperature region were reproduced. It has been shown that the fracture process in the transition region strongly depends on both the stress and strain state, and can be effectively predicted using the continuum damage models incorporating with the stress state effect.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and FEA Investigations on the Fracture Properties of Pipe Structures Under Internal Pressure in DBTT Region
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3110015
dc.journal.fristpage34503
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsTemperature
dc.keywordsStructures
dc.keywordsMaterials properties
dc.keywordsFinite element analysis
dc.keywordsFracture (Process)
dc.keywordsPipes
dc.keywordsStress
dc.keywordsDensity
dc.keywordsFailure AND Project tasks
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record