Show simple item record

dc.contributor.authorSimon Kamel
dc.contributor.authorNoel P. O’Dowd
dc.contributor.authorKamran M. Nikbin
dc.date.accessioned2017-05-09T00:35:07Z
dc.date.available2017-05-09T00:35:07Z
dc.date.copyrightJune, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28510#031406_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141813
dc.description.abstractThe application of two-parameter approaches to describe crack-tip stress fields has generally focused on Ramberg–Osgood (RO) power law material behavior, which limits the range of applicability of such approaches. In this work we consider the applicability of a J-Q or J-A2 approach (the latter is designated here as the J-A approach) to describe the stress fields for RO power law materials and for a material whose tensile behavior is not described by a RO model. The predictions of the two-parameter approaches are compared with full field finite-element predictions. Results are presented for shallow and deep-cracked tension and bend geometries, as these are expected to provide the expected range of constraint conditions in practice. A new approach for evaluating Q is proposed for a RO material, which, for a given geometry, makes Q dependent only on the strain hardening exponent.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Two-Parameter Approaches to Describe Crack-Tip Fields in Engineering Structures
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3120266
dc.journal.fristpage31406
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsStress
dc.keywordsGeometry
dc.keywordsStress AND Structures
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record