Show simple item record

dc.contributor.authorJin-Weon Kim
dc.contributor.authorYeon-Soo Na
dc.contributor.authorSung-Ho Lee
dc.date.accessioned2017-05-09T00:35:06Z
dc.date.available2017-05-09T00:35:06Z
dc.date.copyrightJune, 2009
dc.date.issued2009
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28510#031210_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/141797
dc.description.abstractDuring normal operating conditions, piping systems in nuclear power plants are subject to internal pressure and bending loads induced by deadweight, thermal expansion, and internal pressure. Thus, understanding the effect of bending load on the failure of wall-thinned elbows is important to understand failure behavior and to evaluate the failure pressure reliably. This study includes a series of burst tests using full-scale 4-in. schedule 80 elbow specimens with local wall-thinning under combined internal pressure and in-plane bending load. The results are compared with those tested under simple internal pressure only. In the tests, various circumferential thinning angles (θ/π=0.125, 0.25, 0.5, 1.0) and thinning locations (intrados, extrados, and full-circumference) were considered. Each specimen was initially subjected to a displacement controlled in-plane bending load, closing mode for extrados wall-thinned elbows, and opening mode for intrados wall-thinned elbows, and then internal pressure was applied up to the point of final failure. The results showed that the effect of in-plane bending on the failure pressure and failure mode was minor under all wall-thinning conditions. In addition, the dependence of failure pressure on the circumferential thinning angle and thinning locations was identical to that observed under simple internal pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Evaluation of the Bending Load Effect on the Failure Pressure of Wall-Thinned Elbows
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3122032
dc.journal.fristpage31210
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsFailure AND Displacement
dc.treeJournal of Pressure Vessel Technology:;2009:;volume( 131 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record