• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Pressure Vessel Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Delayed Hydride Cracking Initiation at Notches in Zr-2.5Nb Alloys

    Thumbnail
    View/Open
    JPVTAS-28515#041407_1.pdf (2.150Mb)
    Date
    2009
    Author
    Jun Cui
    Zhirui Wang
    Gordon K. Shek
    D. A. Scarth
    Metadata
    Show full item record
    Abstract
    Delayed hydride cracking (DHC) is an important crack initiation and growth mechanism in Zr-2.5Nb alloy pressure tubes of CANDU nuclear reactors. DHC is a repetitive process that involves hydrogen diffusion, hydride precipitation, growth, and fracture of a hydrided region at a flaw tip. In-service flaw evaluation requires analyses to demonstrate that DHC will not initiate from the flaw. The work presented in this paper examines DHC initiation behavior from V-notches with root radii of 15 μm, 30 μm, and 100 μm, which simulate service-induced debris fretting flaws. Groups of notched cantilever beam specimens were prepared from two unirradiated pressure tubes hydrided to a nominal hydrogen concentration of 57 wt. ppm. The specimens were loaded to different stress levels that straddled the threshold value predicted by an engineering process-zone (EPZ) model, and subjected to multiple thermal cycles representative of reactor operating conditions to form hydrides at the notch tip. Threshold conditions for DHC initiation were established for the notch geometries and thermal cycling conditions used in this program. Test results indicate that the resistance to DHC initiation is dependent on notch root radius, which is shown by optical metallography and scanning electron microscopy to have a significant effect on the distribution and morphology of the notch-tip reoriented hydrides. In addition, it is observed that one tube is less resistant to DHC initiation than the other tube, which may be attributed to the differences in their microstructure and texture. There is a reasonable agreement between the test results and the predictions from the EPZ model.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/141779
    Collections
    • Journal of Pressure Vessel Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV